Electronic Display

ike4jr · #1 (**permalink**) 03-01-2010, 7:17 PM

Anyone know how to get "change oil" msg. cleared from display? Thanks!!

sfrankland · #2 (**permalink**) 03-01-2010, 7:32 PM

Press and hold the ODO button for a few seconds and it will clear.

ike4jr · #3 (**permalink**) 03-02-2010, 10:33 PM

That's what I tried at first, but must have not held it long enough... I'll try again next time I'm on it. THANKS!!!!

Dr_Al · #4 (**permalink**) 03-03-2010, 12:02 AM

I thought I read where you had to hold the button down and then turn the key on holding the button for a few seconds. I have the instructions saved around here somewhere if that doesn't work.

TheZombieAK · #5 (**permalink**) 03-03-2010, 1:38 PM

Can someone post a picture of what the digital diplay looks like mounted in the Big Red?

I keep hearing about it but can't find a picture of what it actually looks like mounted in it.

Thanks.

sfrankland · #6 (**permalink**) 03-03-2010, 1:52 PM

Not the best picture but it will give you an idea.

Cenflrider · #7 (**permalink**) 03-04-2010, 1:21 AM

Gents,
I installed mine and did not install that trim piece on the dash. Didn't even take the dash out like the instructions suggested. I needed to get another grinding wheel for my Dremel. I finish this weekend snap a picture and post the scanned instructions for all to view.

ike4jr · #8 (**permalink**) 03-08-2010, 10:17 PM

Thanks guys!! I had to hold odo button as I turned key on and it cleared... Thanks again!

Cenflrider · #9 (**permalink**) 03-09-2010, 9:39 PM

Ok here is the pic I stated I would post of the dash without the trim.

sfrankland · #10 (**permalink**) 03-09-2010, 9:54 PM

Why didn't you install the trim ring? I had mine installed at the dealer but if I had my time back I would of installed it myself.

TheZombieAK · #11 (**permalink**) 03-09-2010, 9:55 PM

Cenflrider,

Thanks that looks good. Are you going to add the trim peice to it in the future?

Cenflrider · #12 (**permalink**) 03-09-2010, 10:26 PM

Didn't plan to. But there is a larger gap at the bottom than I hoped for. It looks ok to good but not great. I set the trim piece on there and it prompted me to do what I did. It seems they could have done better in this area also (design) however I'm glad they at least offer a digital cluster. I like the speedo funtion since they can stop you for speeding down here on the trails (rare but it has happened).

TheZombieAK · #13 (**permalink**) 03-10-2010, 1:37 PM

It does look nice, for those that don't have the digital display:

Would you recommend it?
Worth the cost?

Cenflrider · #14 (**permalink**) 03-10-2010, 2:11 PM

Yes! Worth every dime! We went on a trail ride before and after install and I really enjoyed the backlighted display at night not to mention the speedo. Should you choose to get one try this guy first;
New Honda Big Red MUV UTV Digital Meter Kit BigRed : eBay Motors (item 230444088229 end time Mar-31-10 16:11:13 PDT)

He (Jon at Honda of Russelville, Ark.) does ship north so send him an email for cost. BTW I don't even know this guy, just met thru ebay and buying items. He has been great on every purchase and.... you save some coin so it's a win win for both parties.

Let us know how you make out and as you are well aware pictures are needed

.

dobich1 · #15 (**permalink**) 03-10-2010, 2:16 PM

I got mine from Russellville as well, and they were extremely helpful. Would highly recommend...

Michael53471 · #16 (**permalink**) 01-12-2012, 9:47 PM

Is there a plug under the dash for the eloctronic display to plug into?

lsudad63 · #17 (**permalink**) 01-13-2012, 3:07 PM

Under the dash there is a harness that the digital meter will plug into, it comes with good instructions. Also I got information on this sight to help you with like , how to remove the rubber knobs on the shift levers so you can get the dash off the bike to cut out the hole for the meter.