|
Re: HighLifter Springs Installed
The spring compressor I have was too big so I improvised, I used a screwdriver on one end (thru the shock bushing) and then used a ratchet strap wrapped around the screwdriver and the spring and compressed it that way. This works but you must be careful!!!! I was in too big of a hurry to use the right tools!
__________________
2010 Big Red, Camo, SS 112 wheels, ITP 589'S 26x12x12 Rear 26x10x12 Front, Highlifter Springs, #4000 Warn Winch XT with Synthetic Amsteel Rope with Wireless Control, Dual Batteries with Optima Red Top,Cycle Country Plow and Honda Hard Roof.
|