|
Re: Digital Dash
I Started to tear apart my rig last night and was surprised to find several of the screws were cross-threaded, I had to use vise grips on the screwdriver and push really hard with the screw drive to keep from rounding out the screw heads. Also the torx nut heads on the bolts that hold on the safety net clasps, were rounded out and had to use vice grips on the heads to remove the bolts.
I am going to see if i can clean up the threads on the cross threaded using a tap and die set, also going to the hardware store for replacement hex head bolts for the safety clasps.
CAD-Man
|